| About |
|---|
| Polymer-E EV103 is an Ethylene Vinyl Acetate Copolymer (EVA) product. It can be processed by extrusion or foam processing and is available in Asia Pacific. Applications of Polymer-E EV103 include consumer goods, foam and sporting goods. Primary characteristic: good processability.&& |
| Product Description | |
|---|---|
| Supplier | APC |
| Generic | EVA |
| Material Status | Commercial: Negative |
| Features | Excellent Processability |
| Availabilitys | Asia Pacific |
| Process Methods | Foam treatment |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.944 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.5 | g/10min | ASTM D1238 |
| Vinyl acetate content | 21 | wt% | ASTM D2240 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 63.0 | ℃ | ASTM D1525 |
| Melting temperature | 79.0 | ℃ | DSC |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 33 | ASTM D2240 | |
| tensile strength | |||
| fracture | 23.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 740 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |