| About |
|---|
| Product information PA 2241 FR is a flame retardant polyamide 12 for processing in laser sintering systems. It contains a halogen-based flame retardant. Mainly due to its recyclability the material is economical, enabling low-cost part production. Properties flame retardant economic high strain at tensile strength Acceptance criteria JAR 25 (aviation) Typical applications aviation (interior, e.g. air ducts and air outlet valves)&& |
| Product Description | |
|---|---|
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | High crystallization,Flame Characteristics,Grease resistance,Solvent resistance,Renewable resources,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | 3D Printing, Laser Sintering/Melting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.00 | g/cm³ | Internal Method |
| Bulk density | 0.45 | g/cm³ | ISO 60 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Modulus | 1900 | MPa | ISO 527 |
| Tensile Strength | |||
| 6% strain | 46.0 | MPa | ISO 527-2 |
| 7% strain | 49.0 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Broken BRK | 6.0 | % | ISO 527-2 |
| Broken BRK | 15 | % | ISO 527-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 0.45 MPa | 154 | ℃ | ISO 75-2/B |
| 1.8 MPa | 84.0 | ℃ | ISO 75-2/A |
| Melting temperature | 185 | ℃ | ISO 11357 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Z Direction |
| 3. X Direction |
| 4. Y Direction |
| 5. 20°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |