| About |
|---|
| Explore CT PA is a rotomoulding composite technology based on a dual layer system designed to provide ultimate performance in terms of hydrocarbon barrier and impact strength The technology is based on a polyamide 12 (PA) outer layer and a polyolefin modified XP9015 inner layer. The system combines the beneficial properties of the PA12 with improved impact resistance&& |
| Product Description | |
|---|---|
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good liquidity,Good Hardness,High Heat Resistance |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 31.0 | MPa | ISO 527-2/50 |
| Bending modulus | 1250 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| ARM Impact | |||
| 23℃，6.00 mm | 85.0 | J | |
| 23℃，8.00 mm | 138 | J |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 80.0 | ℃ | ISO 75-2/B |
| Operating temperature | 120 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.051 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |