| About |
|---|
| LLBF-118A is a certified prime resin with Butene-comonomer, designed for production of Blown films used in general purpose packaging. LLBF-118A features excellent combination of easy processability with good film strength as well as wide heat sealing temperature range. LLBF-118A applications include garment bags, produce bas and liners. LLBF-118A contains NO slip and NO antiblock. LLBF-118A complies with FDA regulation 21CFR 177.1520(c)3.2a, conditions of use A-H per 21CFR 176.170(c), Table 2.&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good heat sealing,Food contact compliance,Butylene copolymer |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 25 | µm | |
| Secant modulus | |||
| 1% secant, TD, 25 µ m | 248 | MPa | ASTM D882 |
| 1% secant, MD, 25 µ m | 221 | MPa | ASTM D882 |
| tensile strength | |||
| TD, fracture, 25 µ m | 27.6 | MPa | ASTM D882 |
| TD, yield, 25 µ m | 11.0 | MPa | ASTM D882 |
| MD, fracture, 25 µ m | 36.5 | MPa | ASTM D882 |
| MD, yield, 25 µ m | 10.3 | MPa | ASTM D882 |
| Tensile strain | |||
| TD, fracture, 25 µ m | 700 | % | ASTM D882 |
| MD, fracture, 25 µ m | 550 | % | ASTM D882 |
| Drop hammer impact | |||
| 25 µm | 90 | g | ASTM D1709-A |
| Elmandorf tear strength | |||
| MD，25 µm | 150 | g | ASTM D1922 |
| tear strength | |||
| TD，25 µm | 300 | g | ASTM D1922 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45 °, 25.4 µ m, blow molded film | 35 | ASTM D2457 | |
| Haze | |||
| 25.4 µ m, blow molded film | 18 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |