| About |
|---|
| mineral filled PC blend; 5 % mineral filled; UV-stabilized; Vicat/B 120 temperature = 102°C; flame-retardant;; UL recognition 94 V-0 (0.6mm); low smoke density |
| Product Description | |
|---|---|
| Supplier | Covestro |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | |||
| 23℃ | 3200 | MPa | ISO 527-1-2 |
| Tensile stress | |||
| Yield, 23 ° C | 67.0 | MPa | |
| Fracture, 23 ° C | 51.0 | MPa | |
| Tensile strain | |||
| Yield, 23 ° C | 4.0 | % | |
| Fracture, 23 ℃ | > 50 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| -30℃ | 8.0 | kJ/m² | |
| 23℃ | 12 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 102 | ℃ | ISO 306/B120 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.60 mm | V-0 | UL 94 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt Volume Rate | |||
| 260℃，5 kg | 24.0 | cm³/10min | ISO 1133 |
| Melt viscosity (260 ° C) | 250 | Pa·s | ISO 11443-A |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |