| About |
|---|
| HANWHA EVA 1326 is manufactured by Dow autoclave high pressure process and designed for variety of foam molding application such as shoes and sandals etc. EVA 1326 is well known for its excellent processability and high quality assurance.&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Excellent Processability |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Foam treatment |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| Vinyl acetate content | 26.0 | wt% | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 48.0 | ℃ | ASTM D1525 |
| Melting peak temperature | 74.0 | ℃ | ASTM D3417 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 82 | ASTM D2240 | |
| Shaw’s D | 28 | ASTM D2240 | |
| tensile strength | |||
| fracture | 13.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 900 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |