| About |
|---|
| Monprene® OM-10265-01 is a Thermoplastic Elastomer (TPE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Monprene® OM-10265-01 are: Flame Rated RoHS Compliant Typical applications include: Handles Engineering/Industrial Parts Adhesives/Tapes Appliances Business/Office Goods&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.968 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 5.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 62 | ||
| Shaw’s A | 68 | ||
| Shore A, 5 seconds, 22 ℃, injection molding | 65 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture | 8.27 | MPa | |
| MD, fracture | 4.96 | MPa | |
| Tensile strain | |||
| Flow rate, fracture | 540 | % | |
| TD, fracture | 780 | % | |
| tear strength | 31.5 | kN/m | ASTM D624 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.00 mm, all colors | HB | ||
| 6.00 mm, all colors | HB |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Adhesion to ABS | |||
| Adhesion to PBT | |||
| Adhesion to PC | |||
| Adhesion to PC/ABS |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60 | °C | |
| Drying time | 1.0 to 2.0 | hr | |
| Barrel rear temperature | 138 to 188 | °C | |
| Barrel middle temperature | 154 to 199 | °C | |
| Barrel front temperature | 154 to 216 | °C | |
| Nozzle temperature | 154 to 221 | °C | |
| Processing (melt) temperature | 166 to 221 | °C | |
| Mold temperature | 10 to 32 | °C | |
| Injection pressure | 1.38 to 5.52 | MPa | |
| Injection speed | 快速 | ||
| Back pressure | 0.172 to 0.862 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 3. Aged for 0 hr at 71°F |
| 4. Aged for 24 hr at 71°F |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |