LTP ZC-1150 GF 40%

About
For its high rigidity and excellent combination properties, PPS is ideal materials of automobile for light weight. For varied function of parts, PPS for automobile is required to have high rigidity, high stiffness, high toughness, resistance to abrasion, corrosion resistant, resistance to solvent, resistance to temperature leap, resistance to hot water creep deformation, easy to process and good dimensional stability. The structure materials, wear resistant materials, resistant materials, heat leap resistant materials, solvent resistant materials and precise molding materials developed by LETIAN Plastics can meet the increasing need of automobile industry. 1, structure materials -LTP ZC1180A serials The bearing structure parts of automobile such as fender-guard, cover sheet, pedal, hand knob and seat frame, un-bearing parts such as tank cover, discharge pipe, water tank, back mirror cover and lamp shade are all need higher mechanical strength. It includes not only high rigidity, but high shock strength. The LTP ZC1180A serials resin reinforced by crystal whisker of LETIAN Plastic improve the shortages about toughness and mechanic strength of common PPS resin reinforced by 40% glass fiber.&&

About

For its high rigidity and excellent combination properties, PPS is ideal materials of automobile for light weight. For varied function of parts, PPS for automobile is required to have high rigidity, high stiffness, high toughness, resistance to abrasion, corrosion resistant, resistance to solvent, resistance to temperature leap, resistance to hot water creep deformation, easy to process and good dimensional stability. The structure materials, wear resistant materials, resistant materials, heat leap resistant materials, solvent resistant materials and precise molding materials developed by LETIAN Plastics can meet the increasing need of automobile industry. 1, structure materials -LTP ZC1180A serials The bearing structure parts of automobile such as fender-guard, cover sheet, pedal, hand knob and seat frame, un-bearing parts such as tank cover, discharge pipe, water tank, back mirror cover and lamp shade are all need higher mechanical strength. It includes not only high rigidity, but high shock strength. The LTP ZC1180A serials resin reinforced by crystal whisker of LETIAN Plastic improve the shortages about toughness and mechanic strength of common PPS resin reinforced by 40% glass fiber.&&

Product Description
Supplier	Letian
Generic	PPS
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Good Dimensional Stability,Corrosion Resistant,Ultra high toughness,Good wear resistance,Solvent resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.70	g/cm³
Melt Flow Rate	32	g/10min

MECHANICAL	Nominal value	Unit
tensile strength	150	MPa
Tensile strain
fracture	1.2	%
Bending modulus	10200	MPa
bending strength	220	MPa

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	8.0	kJ/m²
Charpy Unnotch Impact strength	15	kJ/m²

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.