| About |
|---|
| MonoSol AF A200 is a PVOH based thermoplastic film, soluble in hot water and manufactured using MonoSol AF’s proprietary blown film technology. MonoSol AF A200 is a typical grade of PVOH hot water-soluble film. It is soluble above 60°C with agitation. It has limited cold wet strength and is primarily used for hospital laundry bags where the bulk of the linen is dry. It can also be used on some VFFS machinery for delivery system applications where the film is being put into an environment with water above 60°C with agitation. Available thickness range is 20 micron (0.8 mil) to 80 micron (3.1 mil).&& |
| Product Description | |
|---|---|
| Generic | PVOH |
| Material Status | Commercial: Active |
| Features | Biodegradable,Water soluble |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| water content | |||
| 23℃ | 6.7 | % | |
| solubility | |||
| Disintegration：60℃，20.0 µm | 1.0 | sec | |
| Disintegration：70℃，20.0 µm | 1.0 | sec | |
| Dissolution：60℃，20.0 µm | 430.0 | sec | |
| Dissolution：70℃，20.0 µm | 300.0 | sec | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 20 | µm | |
| Secant modulus | |||
| 10%，MD：20 µm | 238 | MPa | |
| 100%，MD：20 µm | 64.8 | MPa | |
| 10%，TD：20 µm | 290 | MPa | |
| 100%，TD：20 µm | 45.5 | MPa | |
| tensile strength | |||
| MD, fracture, 20 µ m | 71.7 | MPa | ASTM D882 |
| TD, fracture, 20 µ m | 77.9 | MPa | ASTM D882 |
| MD，20 µm | 71.7 | MPa | ISO 527-3 |
| TD，20 µm | 77.9 | MPa | ISO 527-3 |
| Tensile strain | |||
| MD, fracture, 20 µ m | 130 | % | |
| TD, fracture, 20 µ m | 230 | % | |
| Drop hammer impact | |||
| 20 µm | 290 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD：20 µm | 300 | g | ASTM D1922 |
| TD：20 µm | 300 | g | ASTM D1922 |
| MD：20 µm | 0.031 | N | ISO 6383-2 |
| TD：20 µm | 0.031 | N | ISO 6383-2 |
| dosage | |||
| 20.0 µm | 40.1 | m²/kg | ASTM D4321 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 50%RH |
| 3. Distilled Water (MSTM 205) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |