ROTOLENE® 93050-N

About
Linear Medium Density Polyethylene Copolymer, U.V stabilized. Colors: Black USES: Polyethylene highest quality, for the manufacture of water tanks, containers, etc., excellent for doing integrated interior with foam, introducing maximum color consistency, having a fine finish outer layer of color. This product meet all requirements of the U.S. FDA as specified in 21 C.F.R. 177.1520, covering safe use of polyolefin articles intended for direct food contact.&&

About

Linear Medium Density Polyethylene Copolymer, U.V stabilized. Colors: Black USES: Polyethylene highest quality, for the manufacture of water tanks, containers, etc., excellent for doing integrated interior with foam, introducing maximum color consistency, having a fine finish outer layer of color. This product meet all requirements of the U.S. FDA as specified in 21 C.F.R. 177.1520, covering safe use of polyolefin articles intended for direct food contact.&&

Product Description
Generic	LMDPE
Material Status	Commercial: Active
Features	Weather resistance is good,Food contact compliance,Good color stability
Availabilitys	Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.937	g/cm³	ASTM D1505
Shrinkage rate	0.33 to 0.39		ASTM D1895
Melt Flow Rate
190℃，2.16kg	4.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693
10% non-ionic detergent	300	hr
100% non-ionic detergent	> 1000	hr
Particle size
35 mesh	> 2.00	%	ASTM D1921

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	18.6	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	689	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Low temperature shock
3.18 mm	200	J/m	ARM

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	55.0	℃	ASTM D648

Supplementary information	Nominal value	Unit	Test method
Pourability	1500.00 to 2400.00	g/10 min	ASTM D1895

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.