RELENE® L 60040

About
Relene L 60040 is a UV stabilised narrow molecular weight distribution high density polyethylene grade suitable for injection molding applications. This grade exhibits very high impact strength, high gloss, good dimensional stability and superior ESCR properties. Relene L 60040 is recommended for applications where articles are exposed to sunlight like jumbo crates for fisheries, helmets, paint-pails, etc.&&

About

Relene L 60040 is a UV stabilised narrow molecular weight distribution high density polyethylene grade suitable for injection molding applications. This grade exhibits very high impact strength, high gloss, good dimensional stability and superior ESCR properties. Relene L 60040 is recommended for applications where articles are exposed to sunlight like jumbo crates for fisheries, helmets, paint-pails, etc.&&

Product Description
Supplier	Reliance
Generic	HDPE
Material Status	Commercial: Active
Features	Weather resistance is good,Good surface appearance,High impact resistance,Good Dimensional Stability,Weight distribution,High ESCR
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	4.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
Injection molding	170	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	128	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, injection molding	65		ASTM D2240
tensile strength
Yield, injection molding	25.0	MPa	ASTM D638
Tensile strain
Fracture, injection molding	900	%	ASTM D638
Bending modulus
injection molding	950	MPa	ASTM D790
bending strength
yield	30.0	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	230 to 270	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.