NORDEL™ IP 3722P EL

About
NORDEL™ IP 3722P EL Hydrocarbon Rubber is a semi-crystalline, very low diene-containing polymer with low viscosity for good processability. The low unsaturation provides excellent long term thermal and UV stability. It is specially designed for medium voltage wire and cable applications. It can also be used in peroxide cured molded and other extruded applications. NORDEL IP 3722P EL is made via INSITE* technology. Main Characteristics: Semi-crystalline Very low diene Low molecular weight Heat and UV stable Applications: Low and Medium voltage Wire & Cable Peroxide cured, heat resistant moldings for Wire & Cable applications Complies with: U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 175.105 (Adhesives only) EU, No 10/2011 Consult the regulations for complete details.&&

About

NORDEL™ IP 3722P EL Hydrocarbon Rubber is a semi-crystalline, very low diene-containing polymer with low viscosity for good processability. The low unsaturation provides excellent long term thermal and UV stability. It is specially designed for medium voltage wire and cable applications. It can also be used in peroxide cured molded and other extruded applications. NORDEL IP 3722P EL is made via INSITE* technology. Main Characteristics: Semi-crystalline Very low diene Low molecular weight Heat and UV stable Applications: Low and Medium voltage Wire & Cable Peroxide cured, heat resistant moldings for Wire & Cable applications Complies with: U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 175.105 (Adhesives only) EU, No 10/2011 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.870	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	20	MU	ASTM D1646
Ethylene composition	70.5	wt%	ASTM D3900
Ethylidene norbornene content	0.5	wt%	ASTM D6047
Ash Content	< 0.1	%	ASTM D296
molecular weight distribution	Medium		Internal Method
Propylene content	29.0	wt%	ASTM D3900
Residual Transition Metal	< 10	ppm	Internal Method
Volatiles	< 0.40	wt%	Internal Method

Electrical performance	Nominal value	Unit	Test method
Dissipation factor	< 3.0		ASTM D150

Notes
1. Adhesives only.
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.