| About |
|---|
| Kynar Flex® resins are fluorinated thermoplastic copolymers. Kynar Flex® 3120-15 resin has been specifically designed for use in wire and cable constructions which require a 150°C rating and improve flame and smoke resistance. Kynar Flex® 3120-15 resin is easily processed and has excellent physical, mechanical, thermal and flame resistant characteristics. Its low viscosity allows easy processing. Additional Characteristics: Excellent thermal stability Excellent abrasion resistance High Limiting Oxygen Index Extremely low smoke emission characteristics Kynar Flex® 3120-15 resin meets the smoke and flame requirements of UL 910.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Low smoke,Hypocrystalline,Good wear resistance,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Melting peak temperature | 161 to 168 | ℃ | ASTM D3418 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | |||
| 20 ℃ | 2.0E+14 | ohms·cm | ASTM D257 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 23 ℃ | 65 to 70 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| Yield, 23 ℃ | 24.1 to 34.5 | MPa | ASTM D638 |
| Fracture, 23 ℃ | 34.5 to 48.3 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 300 to 550 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 621 to 827 | MPa | ASTM D790 |
| bending strength | |||
| 23℃ | 20.7 to 34.5 | MPa | ASTM D790 |
| compressive strength | |||
| 23℃ | 31.0 to 41.4 | MPa | ASTM D695 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.76 to 1.79 | g/cm³ | ASTM D792 |
| Apparent viscosity of melt | |||
| 232℃，100 sec^-1 | 500 to 1200 | Pa·s | ASTM D3835 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |