INTENE® C 30 AF

About
Intene® C 30 AF is a solution polymerized low cis polybutadiene produced using an alkyl lithium catalyst at the Grangemouth production facility in Scotland, UK. A TNPP free, food contact approved, non-staining antioxidant is added during the production process. Key Features Its unique molecular structure gives fast dissolving time and fine dispersion of the rubber in the plastic matrix. Main Applications Impact improver of ABS and Polystyrene giving a gloss surface. It can also be used in conjunction with certain block copolymers to give high gloss. The high capacity of loading carbon black and good extrudibility makes this grade suitable for abrasion strips construction in tire building&&

About

Intene® C 30 AF is a solution polymerized low cis polybutadiene produced using an alkyl lithium catalyst at the Grangemouth production facility in Scotland, UK. A TNPP free, food contact approved, non-staining antioxidant is added during the production process. Key Features Its unique molecular structure gives fast dissolving time and fine dispersion of the rubber in the plastic matrix. Main Applications Impact improver of ABS and Polystyrene giving a gloss surface. It can also be used in conjunction with certain block copolymers to give high gloss. The high capacity of loading carbon black and good extrudibility makes this grade suitable for abrasion strips construction in tire building&&

Product Description
Generic	PBR顺式
Material Status	Commercial: Active
Features	Good surface appearance,High impact resistance,Machinable,Food contact compliance,Inoxidizability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Mooney viscosity
ML 1+4，100℃	40	MU	ASTM D1646
1,4 cis content	38.0	wt%	Internal Method
Gel Rating（5% wt/wt in Styrene，25℃）	< 5		Internal Method
Ash Content	< 0.1	%	ASTM D5667
Volatiles	< 0.75	wt%	ASTM D5668
Solution viscosity
5wt% styrene, 25 ℃	42	mPa·s	Internal Method

Supplementary information	Nominal value	Unit	Test method
Alpha Color（5% wt/wt in Styrene，25℃）	5.00		ASTM D1209

Notes
1. Typical properties: these are not to be construed as specifications.
2. unmassed
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.