| About |
|---|
| Hostalen PP H5416K is a natural, nucleated polypropylene random copolymer with high melt viscosity for extrusion. The product has a high heat and extraction stability. Hostalen PP H5416K resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. It is not intended for medical and pharmaceutical applications.&& |
| Product Description | |
|---|---|
| Supplier | PolyMirae |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good heat aging resistance,High impact resistance,High Viscosity,Food contact compliance,High Heat Resistance,Random copolymer,Solvent resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ISO 1183 , ASTM D1505 |
| Melt Flow Rate | ASTM D1238 , ISO 1133 | ||
| 230℃，2.16kg | 0.30 | g/10min | ASTM D1238，ISO 1133 |
| 230℃，5.0kg | 1.3 | g/10min | ASTM D1238，ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| Secant, 23 ℃ | 800 | MPa | ISO 527-1-2 |
| tensile strength | |||
| yield | 26.5 | MPa | ASTM D638 |
| Yield, 23 ℃ | 24.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 10 | % | ASTM D638 |
| Yield, 23 ℃ | 10 | % | ISO 527-2/50 |
| Bending modulus | 834 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -20℃ | 45 | kJ/m² | ISO 179/1eU |
| 0℃ | 无断裂 | ISO 179/1eU | |
| 23℃ | 无断裂 | ISO 179/1eU | |
| Impact strength of cantilever beam notch | |||
| 23℃ | 230 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 83.0 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 65.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| — | 123 | ℃ | ASTM D1525 |
| A50 | 125 | ℃ | ISO 306/A50 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |