| About |
|---|
| EL-Pro P400S is a homopolymer polypropylene resin which is suitable for monofilaments and flat yarn products. Which is manufacturered by extrusion process with spinnerette die, annular die, T-die, coathanger die, etc.&& |
| Product Description | |
|---|---|
| Supplier | SCG |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | Quick molding cycle,Food contact compliance,Homopolymer |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.91 | g/cm³ | ASTM D1505 |
| Resistance to environmental stress cracking | >=500 | hr | ASTM D1693 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.5 | g/10min | ASTM D1238 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Mist density 1000 μ M | 50 | % | ASTM D1003 |
| gloss | 85 | % | ASTM D2457 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 110 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 60.0 | ℃ | ASTM D648 |
| melting point | 163 | ℃ | ASTM D2117 |
| Vicat Softening Temp | |||
| 155 | ℃ | ASTM D1525 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 16.7 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | 24.5 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | |||
| 23℃ | 39.2 | J/m | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 85 | R 级 | ASTM D785 |
| tensile strength | |||
| Yield, 23 ℃ | 31.4 | MPa | ASTM D638 |
| 23℃ | 25.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 650 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 1320 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. Across Flow |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |