Aaroprene® ATPR 1000 70A

About
Aaroprene® ATPR 1000 70A is a Thermoplastic Elastomer (TPE) material. It is available in North America for extrusion, film extrusion, or injection molding.&&

Product Description
GenericTPE
Material StatusCommercial: Active
AvailabilitysNorth America
Process MethodsExtrusion

Technical Data
PHYSICALNominal valueUnitTest method
Density0.998 to 1.10g/cm³ASTM D792
Melt Flow Rate
190℃，2.16kg75g/10minASTM D1238

elastic bodyNominal valueUnitTest method
tensile strength
yield6.89MPaASTM D412
Tensile strain
fracture600%ASTM D412
tear strength35.0kN/mASTM D624

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A70 ASTM D2240
Tensile modulus2.76MPaASTM D412
Taber abraser
1000 cycles, H-18 wheels360mgASTM D1044

Process Conditions
injectionNominal valueUnitTest method
ExtrusionNominal valueUnitTest method
Barrel rear temperature79°C
Barrel middle temperature177°C
Barrel front temperature193°C
Nozzle temperature199°C
Injection pressure3.45 to 4.83MPa
Barrel 1 zone temperature79°C
Barrel 2 zone temperature149°C
Barrel 3 zone temperature149°C
Barrel 4 zone temperature149°C
Barrel 5 zone temperature149°C
Melt temperature149 to 193°C
Nozzle temperature193°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die C
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.