Shandong PA1212 PA1212C-04

About
Shandong PA1212 PA1212C-04 is a Polyamide 1212 (Nylon 1212) material. It is available in Asia Pacific. Important attributes of Shandong PA1212 PA1212C-04 are: Good Processability High Strength High Toughness Low Shrinkage Low Temperature Resistant Typical applications include: Automotive Hose/Tubing&&

Product Description
Supplier	Guangyin
Generic	PA 1212
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Low or no water absorption,Antifreeze,Low contractility,Ultra high toughness,Good wear resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
humidity	< 0.20	%

MECHANICAL	Nominal value	Unit
tensile strength
yield	50.0	MPa
Tensile strain
fracture	350	%
Bending modulus	240	MPa
bending strength	12.0	MPa

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	无断裂
Charpy Unnotch Impact strength	无断裂

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.