Pearlbond™ ECO D900

About
Pearlbond™ ECO D900 is a linear, aromatic polyurethane based on specialty polyol from renewable sources. It contains 67% of renewable material as certified according to ASTM-D6866. It is supplied in form of small white or lightly yellowish granules, which combines a very extremely high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives. APPLICATIONS Pearlbond™ ECO D900 is mainly used for textile coating for making shoe-stiffeners (toe puffs & counters), by extrusion or sintering process. Pearlbond™ ECO D900 can be used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.&&

About

Pearlbond™ ECO D900 is a linear, aromatic polyurethane based on specialty polyol from renewable sources. It contains 67% of renewable material as certified according to ASTM-D6866. It is supplied in form of small white or lightly yellowish granules, which combines a very extremely high crystallization rate with a very high thermoplasticity level. It is used for Hot Melt adhesives. APPLICATIONS Pearlbond™ ECO D900 is mainly used for textile coating for making shoe-stiffeners (toe puffs & counters), by extrusion or sintering process. Pearlbond™ ECO D900 can be used for making heat-sealable fabrics (thermobonding), obtained by coating processes such as scattering or dot-coating (powder or paste). In all cases, the product is previously ground into powder, by cryogenic grinding. The particle size of the powder will depend on the application technique to be used.&&

Product Description
Supplier	Lubrizol Advanced Materials
Generic	TPU
Material Status	Commercial: Active
Features	Good heat sealing,Renewable resources,Aromatic,Linear polymer structure
Availabilitys	North America,Europe
Process Methods	Extrusion

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	52		ISO 868

THERMAL	Nominal value	Unit	Test method
Melting temperature	80.0 to 85.0	℃	Internal Method

Supplementary information	Nominal value	Unit	Test method
Crystallization rate	Extremely High		Internal Method
Renewable Content	67	%	ASTM D6866
Softening range	70 to 80	℃	Internal Method
Thermoplasticity	Very High		Internal Method

PHYSICAL	Nominal value	Unit	Test method
Density
20℃	1.19	g/cm³	ISO 2781
Melt Flow Rate
170℃，2.16kg	30 to 60	g/10min	ISO 1133
Apparent viscosity of melt
160℃	930	Pa·s	ISO 1133

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	90	°C
Barrel 2 zone temperature	100 to 120	°C
Barrel 3 zone temperature	100 to 120	°C
Barrel 4 zone temperature	100 to 120	°C
Nozzle temperature	100 to 120	°C
Extruder screw length to diameter ratio L / D	25.0:1.0
Extruder screw compression ratio	3.0:1.0

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.