| About |
|---|
| DW 602 is a speciality fiber glass filled PTFE compound. The color is Maroon / Red. DW 602 is manufactured in a thickness range of 0.010″ to 0.064″. DW 602 is used in both bearing and seal applicaions and has the best combination of flexibilty and load carrying properties of the Dynaglide series. This product has been designed for use running against hard mating surfaces like Cold Rolled Steel.&& |
| Product Description | |
|---|---|
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Good flexibility |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.12 | g/cm³ | ASTM D792 |
| Thickness | 0.381 to 1.63 | mm | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 10.3 | MPa | ASTM D1457 |
| Tensile strain | |||
| fracture | 150 | % | ASTM D1457 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D696 | ||
| MD | 9.4E-5 | 1/℃ | ASTM D696 |
| TD | 7.4E-5 | 1/℃ | ASTM D696 |
| deformation | 3.0 | % | ASTM D621 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Core ID | 7.62 | cm | |
| Width | 12.7 to 305 | mm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |