| About |
|---|
| Product Description | |
|---|---|
| Generic | PA66 |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| proportion | 1.09 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，24hr | 1.28 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 55 | MPa | ISO 527 |
| elongation at break | 140 | % | ISO 527 |
| bending strength | 73 | MPa | ISO 178 |
| Bending modulus | 1.0*103 | MPa | ISO 178 |
| Charpy impact strength | |||
| Gap | ≥80 | KJ/m² | ISO 179（leA） |
| Non gap | 不断 | KJ/m² | ISO 179（leA） |
| Processability | Nominal value | Unit | Test method |
|---|---|---|---|
| Forming shrinkage rate | 1.5-2.0 | % | ISO 294-4 |
| Spiral length | 21 | cm |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardancy | HB | UL94 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.82MPa | 58 | ℃ | ISO 75f |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Midpoint constant | |||
| 106HZ | 3.4 | IEC 60250 | |
| Tangent of dielectric loss angle | |||
| 106HZ | 3.0*10-2 | IEC 60250 | |
| Volumetric resistance | 1*1014 | Ω。m | IEC 60093 |
| Dielectric strength | 30 | KV/m | IEC 60243 |
| Arc resistant | — | Sec | IEC 61621 |
| Leakage trace index | — | V | IEC 60112 |
| ash content | 0 | % |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |