| About |
|---|
| SAPYLENE T40HLB is a Polypropylene material filled with 40% talc. It is available in Africa & Middle East. Primary attribute of SAPYLENE T40HLB: Non-Toxic. Typical applications include: Automotive Industrial Applications&& |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Nontoxicity |
| Availabilitys | Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.23 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 7.7 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 7.2 | J/m | ISO 180 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 23 ℃ | 70 | ASTM D2240 | |
| tensile strength | ISO 527-2/100 | ||
| yield | 12.9 | MPa | ISO 527-2/100 |
| fracture | 2.42 | MPa | ISO 527-2/100 |
| Tensile strain | |||
| fracture | 3.0 | % | ISO 527-2/100 |
| Bending modulus | 2.14 | MPa | ISO 178 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 3.9 in/min |
| 3. 1A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |