Adell PET WL-37

About
Adell PET WL-37 is a Polyethylene Terephthalate (PET) material filled with 35% glassmineral. It is available in North America. Primary attribute of Adell PET WL-37: Flame Rated.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	HB
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.62	g/cm³	ASTM D792
Shrinkage rate
MD	0.20 to 0.30	%	ASTM D955
Water absorption rate
24hr	0.050	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃，3.2mm	59	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	238	℃	ASTM D648
1.8 MPa, unannealed	210	℃	ASTM D648
Melting temperature	232 to 249	℃	ASTM D789

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness			ASTM D785
M-level	85		ASTM D785
R-level	119		ASTM D785
tensile strength	117	MPa	ASTM D638
Bending modulus	10300	MPa	ASTM D790
bending strength	169	MPa	ASTM D790
compressive strength	141	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.