TECHNYL STAR™ S 216L2 V30 BLACK

About
TECHNYL STAR® S 216L2 V30 Black is based on a patented high flow polyamide 6 resin (TechnylStar), UV stabilized, reinforced with 30% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant productivity improvement and allows more freedom in mould and part design versus a standard polyamide solutions.&&

Product Description
Supplier	DOMO
Generic	PA6
Material Status	Commercial: Active
Features	Weather resistance is good,High impact resistance
Availabilitys	Africa & Middle East ,North America,Europe
Process Methods	Injection Molding

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	10400	MPa	ISO 527-2/1A
tensile strength
Fracture, 23 ℃	160	MPa	ISO 527-2/1A
Tensile strain
Fracture, 23 ℃	2.1	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	8.1	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	45	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Melting temperature	222	℃	ISO 11357-3

Process Conditions
Injection	Nominal value	Unit	Test method
drying temperature	80	°C
Recommended maximum moisture content	0.20	%
Temperature at the rear of the barrel	230 to 235	°C
Temperature in the middle of the barrel	235 to 240	°C
Front temperature of material barrel	240 to 245	°C
Mold temperature	60 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.