| About |
|---|
| Bergamid™ B700 UF black is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion or injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated RoHS Compliant Flame Retardant Halogen Free&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Good surface appearance,High impact resistance,Hydrolysis stability,Good Printability,Biodegradable,Food contact compliance,Hypocrystalline,Aliphatic series,Compostable,Poor moisture permeability,V-0 |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | DIN 53479 |
| K-Value | 74.0 to 78.0 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 1500 | MPa | ISO 527-1-2 |
| tensile strength | |||
| Fracture, 23 ℃ | 55.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| Fracture, 23 ℃ | 20 | % | ISO 527-2/5 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 6.3 | kJ/m² | ISO 179/1eA |
| 23℃ | 8.4 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23℃ | 无断裂 | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 190 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 80.0 | ℃ | ISO 75-2/A |
| Maximum operating temperature | IEC 60216 | ||
| — | 85 | ℃ | IEC 60216 |
| short time | 160 | ℃ | IEC 60216 |
| Melting temperature | |||
| DSC | 223 | ℃ | ISO 3146 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+10 | ohms | IEC 60093 |
| Volume resistivity | 1.0E+12 | ohms·cm | IEC 60093 |
| Dielectric strength | 45 | kV/mm | IEC 60243-1 |
| Relative permittivity | |||
| 1 MHz | 7.00 | IEC 60250 | |
| Compared to the leakage tracing index | |||
| Solution A | 600 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.80 mm, all colors | V-0 | Internal Method | |
| Igniting temperature of the hot wire | |||
| 3 mm | 960 | ℃ | IEC 60695-2-13 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. ±0.03 g/cm³ |
| 3. 96% H2SO4 |
| 4. Continuous (GTP 50% Tensile) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |