Metocene HM560R

About
Metocene HM560R is a medium melt flow rate resin with a very narrow molecular weight distribution. It is ideally suited for nonwoven applications including spunbond as well as continuous filament yarn and high tenacity fibers. This material is available as an extruded pellet. This product contains no peroxide or peroxide decomposition by-products. It is a low gas fading product. The narrow molecular weight distribution and high degree of resin consistency promote finer fibers, higher tenacity fibers as well as enhanced fiber filament thread line continuity. This is a low smoke, clean running resin with low gas fading characteristics.&&

About

Metocene HM560R is a medium melt flow rate resin with a very narrow molecular weight distribution. It is ideally suited for nonwoven applications including spunbond as well as continuous filament yarn and high tenacity fibers. This material is available as an extruded pellet. This product contains no peroxide or peroxide decomposition by-products. It is a low gas fading product. The narrow molecular weight distribution and high degree of resin consistency promote finer fibers, higher tenacity fibers as well as enhanced fiber filament thread line continuity. This is a low smoke, clean running resin with low gas fading characteristics.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Low smoke,Weight distribution,Moderate liquidity,Solvent resistance,Homopolymer
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.903	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238
Melt Volume Rate
230℃，2.16 kg	34.0	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	1450	MPa	ISO 527-2
tensile strength
Yield, 23 ℃	30.0	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	> 50	%	ISO 527-2
Yield, 23 ℃	9.0	%	ISO 527-2
Bending modulus
23℃	1400	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	2.0	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	93.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	136	℃	ISO 306/A50
B50	82.0	℃	ISO 306
Melting temperature
DSC	145	℃	ISO 3146

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.