| About |
|---|
| Two-component foam systems for the production of high-absorbing cavity foam Polyol-Component: Preparation based on: polyol, catalyst, stabilizer, additives Iso-Component: Preparation based on: P-MDI = Iso 145/8&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PUR+MDI |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.0280 | g/cm³ | ISO 845 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 0.0560 | MPa | ISO 1798 |
| Tensile strain | |||
| fracture | 120 | % | ISO 1798 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |