VESTOLIT G CG 10 (Specialty Suspension)

About
VESTOLIT G CG 10 is a homopolymer specialty suspension resin intended for use in lowering the gloss of extruded or plastisol parts. This resin provides low surface gloss and texturing effects for flexible vinyl products, allowing the production of broad range of surface effects without the need for secondary operation process which helps to reduce manufacturing cost. The ability to increase surface roughness provides a reduced surface blocking and allows the ease of handling in stacked or bundled parts.&&

Product Description
GenericPVC homopolymer
Material StatusCommercial: Active
FeaturesLow smoothness,Low Gloss
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe
Process MethodsDipping coating method

Technical Data
PHYSICALNominal valueUnitTest method
Density1.40g/cm³ASTM D792
pollutant Internal Method
Dark Particles1 Internal Method
Light Colored Particles5 Internal Method
Magnetic Particles0 Internal Method
Apparent density of loose states0.370g/cm³Internal Method
Particle size Internal Method
<105 micron16.0%Internal Method
> 250 micron4.00%Internal Method
Average particle size150µmInternal Method

Supplementary informationNominal valueUnitTest method
Powder mixing time2.8minInternal Method
Residual Vinyl Chloride Monomer< 1ppmInternal Method
volatility0.060%Internal Method
polymerization process悬挂 
porosity0.570cm³/gInternal Method
Flow time
Conditioned Funnel Flow Time34.0secInternal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. VESTOLIT STP 1169
3. VESTOLIT STP 1217 Unit: #/100in2
4. VESTOLIT DFT 1466
5. VESTOLIT STP 1094
6. VESTOLIT STP 488 (with provided formulation)
7. VESTOLIT STP 1005
8. VESTOLIT STP 793
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.