| About |
|---|
| VisiJet FTI materials create durable plastic parts with excellent, high resolution detail that are tough enough for functional testing and snap-fit applications.&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good flexibility,Good surface appearance,Durability |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | 17 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 77.0 | ℃ | DMA |
| Hot deformation temperature | 50 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 65 to 70 | ||
| Tensile modulus | 400 to 600 | MPa | ASTM D638 |
| tensile strength | 8.00 to 18.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 2.0 to 4.0 | % | ASTM D638 |
| Bending modulus | 500 to 700 | MPa | ASTM D790 |
| bending strength | 16.0 to 22.0 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |