Tianchen J-700

About
The CPVC resin is made by chlorination modification of PVC resin and is one advanced engineering material. This product is white or canary loose grain or powder with no smell, odorless and innocuity. After chlorination, the irregularity of molecular bond of the PVC resin and the polarity of molecular chain increase, the dissolvability and chemical stability of the resin also increase, and accordingly improve the heat resistance and resist the corrosion of acid, caustic, salt and oxidant etc. In addition, it improve the mechanical performance of numerical heat distortion temperature and chlorine content increases from 56.7% to 63-69% and Vicat softening temperature from 72-82°C to 90-125°C; its highest service temperature can reach 110°C and long-term service temperature can reach 95°C. Accordingly, CPVC is one kind of advanced engineering plastic with vast foreground.&&

About

The CPVC resin is made by chlorination modification of PVC resin and is one advanced engineering material. This product is white or canary loose grain or powder with no smell, odorless and innocuity. After chlorination, the irregularity of molecular bond of the PVC resin and the polarity of molecular chain increase, the dissolvability and chemical stability of the resin also increase, and accordingly improve the heat resistance and resist the corrosion of acid, caustic, salt and oxidant etc. In addition, it improve the mechanical performance of numerical heat distortion temperature and chlorine content increases from 56.7% to 63-69% and Vicat softening temperature from 72-82°C to 90-125°C; its highest service temperature can reach 110°C and long-term service temperature can reach 95°C. Accordingly, CPVC is one kind of advanced engineering plastic with vast foreground.&&

Product Description
Supplier	Tianchen
Generic	CPVC
Material Status	Commercial: Active
Features	Thermal insulation,Corrosion Resistant,Acidproof,Low odor,Inoxidizability,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.45 to 1.58	g/cm³
Chlorine content	66.0 to 69.0	wt%

MECHANICAL	Nominal value	Unit	Test method
tensile strength	54.0 to 70.0	MPa
bending strength	120	MPa

THERMAL	Nominal value	Unit
Vicat Softening Temp	100 to 125	℃
Linear coefficient of thermal expansion
MD	7.5E-5 to 8.0E-5	1/℃

Supplementary information	Nominal value	Unit	Test method
decomposition temperature	> 120	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.