CELBLEN CP114 - SOLIAO

About
CELBLEN CP114 is a Polypropylene material filled with 40% cellulose. It is available in Asia Pacific.&&

Product Description
Supplier	Daicel
Generic	PP not specified
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.07	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	46.0	MPa	ISO 527-2
Bending modulus	4600	MPa	ISO 178
bending strength	80.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	3.0	kJ/m²	ISO 179-1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	155	℃	ISO 75-2/B
1.8 MPa, unannealed	115	℃	ISO 75-2/A

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.