Yuyao PET PETG30 (FR)

About
Yuyao PET PETG30 (FR) is a Polyethylene Terephthalate (PET) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific. Applications of Yuyao PET PETG30 (FR) include electrical/electronic applications, automotive, engineering/industrial parts and lighting applications. Characteristics include: Flame Rated Flame Retardant Creep Resistant Fatigue Resistant Good Dimensional Stability&&

About

Yuyao PET PETG30 (FR) is a Polyethylene Terephthalate (PET) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific. Applications of Yuyao PET PETG30 (FR) include electrical/electronic applications, automotive, engineering/industrial parts and lighting applications. Characteristics include: Flame Rated Flame Retardant Creep Resistant Fatigue Resistant Good Dimensional Stability&&

Product Description
Supplier	Tenglong
Generic	PET
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,High impact resistance,Good Dimensional Stability,Flame Characteristics,High Heat Resistance,Fatigue resistance,Insulation,V-0
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.55	g/cm³	ASTM D792
Shrinkage rate
MD	0.50 to 0.80	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength	120	MPa	ASTM D638
Tensile strain
fracture	3.0	%	ASTM D638
Bending modulus	7500	MPa	ASTM D790
bending strength	180	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	10.0	kJ/m²	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	230	℃	ASTM D648

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+16	ohms·cm	ASTM D257

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
1.60 mm	V-0	UL 94
3.20 mm	V-0	UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	115 to 120	°C
Drying time	6.0 to 8.0	hr
Processing (melt) temperature	240 to 265	°C
Mold temperature	60 to 100	°C
Injection pressure	70.0 to 100	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.