SAUDPOL SP-351-BV13

About
Un-saturated polyester resin. Principal properties ISOphthalic acid based polyester Excellent mechanical properties Good weathering properties To be used when maximum durability is required Water, Oil & Chemicals resistant Applications Construction of boat, containers, vessels Filament winding Pipe, fishing rods, ducts Car body parts&&

Product Description
Generic	热固性聚酯
Material Status	Commercial: Active
Features	Weather resistance is good,Moisture resistance,Durability,Grease resistance,Solvent resistance
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
acid value	15.00 to 20.00	mg KOH/g
styrene content	35 to 38	%

MECHANICAL	Nominal value	Unit
Tensile modulus	4100	MPa
tensile strength	86.0	MPa
Tensile strain
fracture	4.4	%
Bending modulus	4250	MPa
bending strength	165	MPa

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	80	℃

Supplementary information	Nominal value	Unit	Test method
exothermic peak	175 to 186	℃

Uncured Properties	Nominal value	Unit
Density
20℃	1.12	g/cm³
viscosity
25℃	0.45 to 0.68	Pa·s
Curing time	0.42 to 0.62	hr
Gelation time	14 to 22	min

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.