| About |
|---|
| The Monprene RG-10100 series is a group of high performance thermoplastic elastomers specifically designed for regulated applications including food contact, toys, and children’s products. Monprene RG-10160 is a low density, medium hardness grade that complies with various US FDA and European regulations and directives for food contact and toy safety and is suitable for injection molding. Please contact Teknor Apex for a regulatory compliance letter.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Smoothness,ADCF,Food contact compliance,Good bond,Lubricating,No BPA,Low density,Moderate liquidity,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shore A, 5 seconds | 60 | ISO 868 | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, fracture | 10.0 | MPa | ISO 37 |
| TD, 100% strain | 1.52 | MPa | ISO 37 |
| Tensile strain | |||
| TD, fracture | 850 | % | ISO 37 |
| tear strength | ISO 34-1 | ||
| TD | 20 | kN/m | ISO 34-1 |
| MD | 28 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 70℃，22 hr | 29 | % | ISO 815 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 7.0 | g/10min | ASTM D1238 |
| Apparent viscosity of melt | |||
| 200℃，206 sec^-1 | 230 | Pa·s | ASTM D3835 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 160 to 177 | °C | |
| Barrel middle temperature | 182 to 204 | °C | |
| Barrel front temperature | 193 to 216 | °C | |
| Nozzle temperature | 182 to 227 | °C | |
| Processing (melt) temperature | 182 to 227 | °C | |
| Mold temperature | 27 to 49 | °C | |
| Injection speed | 中等偏快 | ||
| Back pressure | 0.172 to 0.689 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| Cushion | 3.81 to 12.7 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method Ba, Angle (Unnicked) |
| 3. Type A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |