| About |
|---|
| Ecomass® 1080ZB92是一种聚酰胺12（尼龙12）材料,含有的填充物为填料。 该产品在北美洲有供货,加工方式为:注射成型。 Ecomass® 1080ZB92的主要特性有: High Toughness 坚硬 无毒&& |
| Product Description | |
|---|---|
| Generic | PA12 |
| Material Status | Commercial: Active |
| Features | Ultra high toughness,Nontoxicity |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 6.88 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.50 to 0.60 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 6450 | MPa | ASTM D638 |
| tensile strength | 34.5 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 3.8 | % | ASTM D638 |
| Bending modulus | 6410 | MPa | ASTM D790 |
| bending strength | 49.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 140 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 121 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 107 | ℃ | ASTM D648 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 74 | °C | |
| Drying time | 4.0 | hr | |
| Processing (melt) temperature | 232 to 260 | °C | |
| Mold temperature | 66 to 82 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |