| About |
|---|
| 3M™ Dyneon™ Modified PTFE Compound TFX R4262 is a free-flowing suspension compound containing 10% carbon fibre for ram extrusion. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Good chemical stability High limiting oxygen index (LOI) Low friction behaviour Very good mechanical properties Exceptional temperature resistance&& |
| Product Description | |
|---|---|
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Low coefficient of friction |
| Availabilitys | North America,Europe |
| Process Methods | Plunger extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.07 | g/cm³ | ASTM D4745-06 |
| Apparent density | 0.79 | g/cm³ | ASTM D4894 |
| Shrinkage rate | |||
| MD | 1.4 | % | ASTM D4894-07 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 67 | DIN 53505 | |
| tensile strength | 23.5 | MPa | ASTM D4745-06 |
| Tensile strain | |||
| fracture | 320 | % | ASTM D4745-06 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |