MAJORIS EN060 - 8139

About
EN060 – 8139 is a heterophasic copolymer (block copolymer) characterised by high impact strength combined with high stiffness and good flow properties. The product is available in grey (EN060 – 8139) but other colours can be supplied on request. EN060 – 8139 has got additive formulation giving low taste and odour as well as good processability and demoulding properties. This makes it, combined with a high gloss, an excellent choice for household and packaging articles APPLICATIONS EN060 – 8139 has been developed especially for demanding applications in automotive industry.&&

About

EN060 – 8139 is a heterophasic copolymer (block copolymer) characterised by high impact strength combined with high stiffness and good flow properties. The product is available in grey (EN060 – 8139) but other colours can be supplied on request. EN060 – 8139 has got additive formulation giving low taste and odour as well as good processability and demoulding properties. This makes it, combined with a high gloss, an excellent choice for household and packaging articles APPLICATIONS EN060 – 8139 has been developed especially for demanding applications in automotive industry.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good surface appearance,High impact resistance,Renewable resources,Good liquidity,Good stripping performance,Food contact compliance,Low odor,Block Copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.902	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	12	g/10min	ISO 1133
Shrinkage rate	1.0 to 2.0	%

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	4.0	kJ/m²	ISO 179/1eA
23℃	8.0	kJ/m²	ISO 179/1eA
Multi axial instrumented impact energy			ISO 6603-2
-20℃，Total Penetration Energy	25.0	J	ISO 6603-2
0℃，Total Penetration Energy	35.0	J	ISO 6603-2

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1250	MPa	ISO 527-1-2
tensile strength
yield	25.0	MPa	ISO 527-2/50
Tensile strain
yield	6.0	%	ISO 527-2/50
Rockwell hardness
R-level	86		ISO 2039-2

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	230 to 260	°C
Mold temperature	10 to 30	°C
Injection speed	Fast
Hold pressure	20.0 to 50.0	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.