UBE Nylon 5033 B

About
UBE NYLON 5033 B is a basic, high viscosity Polyamide 6/6.6 grade without any additional modification suitable for a wide field of film and extrusion applications. The grade offers an excellent processability and outstanding properties.&&

Product Description
Supplier	UBE
Generic	PA66/6
Material Status	Commercial: Active
Features	Excellent Processability,High Viscosity,Food contact compliance
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ISO 1183

MECHANICAL	Nominal value	Test method
friction coefficient		ASTM D1894
With oneself – dynamic	1.0	ASTM D1894
With oneself – static	1.0	ASTM D1894

film	Nominal value	Unit	Test method
Secant modulus
MD, cast thin film	400	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield, extruded film	24.0	MPa	ASTM D882
MD, fracture, extruded film	110	MPa	ASTM D882
Tensile strain
MD, fracture, extruded film	600	%	ASTM D882

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	196	℃	ISO 3146

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+15	ohms	ASTM D257

optical performance	Nominal value	Unit	Test method
gloss	155		ASTM D523
Haze	0.50	%	ASTM D1003

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.