Bayfill® EA 6004 (5 pcf)

About
Bayfill EA 6004 is an energy-absorbing, semirigid polyurethane foam system designed for automotive interior applications. Foam made with Bayfill EA 6004 has a relatively low density and ability to recover its shape after impact making it an excellent choice for occupant impact protection above the vehicle beltline. The Bayfill EA 6004 system can be incorporated into vehicle headliners and pillar covers for improved occupant protection in collisions. The Bayfill EA 6004 system is supplied as two components. Component A is a modified polymeric diphenylmethane diisocyanate blend. Component B is a polyether polyol system. As with any product, use of the Bayfill EA 6004 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.&&

About

Bayfill EA 6004 is an energy-absorbing, semirigid polyurethane foam system designed for automotive interior applications. Foam made with Bayfill EA 6004 has a relatively low density and ability to recover its shape after impact making it an excellent choice for occupant impact protection above the vehicle beltline. The Bayfill EA 6004 system can be incorporated into vehicle headliners and pillar covers for improved occupant protection in collisions. The Bayfill EA 6004 system is supplied as two components. Component A is a modified polymeric diphenylmethane diisocyanate blend. Component B is a polyether polyol system. As with any product, use of the Bayfill EA 6004 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability.&&

Product Description
Supplier	Covestro
Generic	PUR-脂肪族+MDI
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Molded density	80.1	kg/m³

MECHANICAL	Nominal value	Unit	Test method
Tensile strain
fracture	16	%	ASTM D638
compressive strength			ASTM D1621
10% strain	0.249	MPa	ASTM D1621
50% strain	0.388	MPa	ASTM D1621
70% strain	0.703	MPa	ASTM D1621

THERMAL	Nominal value	Unit	Test method
Thermosetting components
Component A	按重量计算的混合比: 140
Component B	按重量计算的混合比: 100

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.