Etinox® 631P - SOLIAO

About
The resin ETINOX 631-P is a vinyl chloride homopolymer obtained by suspension polymerization. CHARACTERISTICS: The resin ETINOX 631-P is a resin of high molecular weight that due to its morphological properties and its distribution of molecular weight, has an excellent thermal stability, a rapid and homogeneous gelification and good fluidity when fused. Due to its high bulk density, ETINOX 631 has a high level of productivity when processed. RECOMMENDED APPLICATIONS: ETINOX 631-P has been especially designed for the manufacture of rigid profiles and, given the good color of the base resin, permits obtaining profiles with a high level of whiteness, as is in the case of window profiles.&&

About

The resin ETINOX 631-P is a vinyl chloride homopolymer obtained by suspension polymerization. CHARACTERISTICS: The resin ETINOX 631-P is a resin of high molecular weight that due to its morphological properties and its distribution of molecular weight, has an excellent thermal stability, a rapid and homogeneous gelification and good fluidity when fused. Due to its high bulk density, ETINOX 631 has a high level of productivity when processed. RECOMMENDED APPLICATIONS: ETINOX 631-P has been especially designed for the manufacture of rigid profiles and, given the good color of the base resin, permits obtaining profiles with a high level of whiteness, as is in the case of window profiles.&&

Product Description
Generic	PVC homopolymer
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good flexibility,High impact resistance,Antifreeze,noise reduction,Good tear strength,Good wear resistance,Grease resistance,Ozone resistance,Solvent resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.56	g/cm³	ISO 60
K (wear) coefficient	68.0		ISO 1628-2
Specific Viscosity	0.448		ISO 1628-2
Particle size			ISO 4610
<0.063 µm	1.50	%	ISO 4610
>0.250 µm	2.00	%	ISO 4610

Supplementary information	Nominal value	Unit	Test method
volatility	0.20	%	ISO 1269

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.4 gr of resin in 100 cc of cyclohexanone at 25°C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.