KRATON® D1162 B

About
Kraton D1162 B is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied from South America in the physical form identified below. Kraton D1162 BT – supplied as a porous pellet dusted with talc Kraton D1162 B is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.&&

About

Kraton D1162 B is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied from South America in the physical form identified below. Kraton D1162 BT – supplied as a porous pellet dusted with talc Kraton D1162 B is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.&&

Product Description
Generic	SIS
Material Status	Commercial: Active
Features	Block Copolymer,Inoxidizability,Linear polymer structure
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ISO 2781
Apparent density	0.35	g/cm³	ASTM D1895B
Melt Flow Rate
200℃，5.0kg	40	g/10min	ISO 1133
Polystyrene content	40 to 46	%	Internal Method
Total Extractables	< 1.0	%	Internal Method
molecular weight	83700 to 96000	g/mol	Internal Method
Ash Content
T	0.15 to 0.35	%	ISO 247
Volatiles	< 0.30	%	Internal Method
Gel content	< 50	ppm	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.