Aaroprene® ATPO 3000 90A

About
Aaroprene® ATPO 3000 90A is a Thermoplastic Polyolefin Elastomer (TPO (POE)) material. It is available in North America for extrusion or injection molding.&&

Product Description
Generic	Polyolefin Elastomer
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.928	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	10	g/10min	ASTM D1238

elastic body	Nominal value	Unit	Test method
tensile strength
yield	5.52	MPa	ASTM D412
Tensile strain
fracture	620	%	ASTM D412

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-75.0	℃	ASTM D746

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	90		ASTM D2240
Tensile modulus	4.21	MPa	ASTM D412
Taber abraser
1000 cycles, H-18 wheels	165	mg	ASTM D1044

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Barrel rear temperature	177 to 216	°C
Barrel middle temperature	177 to 216	°C
Barrel front temperature	177 to 216	°C
Nozzle temperature	188 to 221	°C
Processing (melt) temperature	182 to 221	°C
Mold temperature	10.0 to 65.6	°C
Back pressure	0.0689 to 1.03	MPa
Screw speed	100 to 200	rpm
Screw length to diameter ratio	20.0:1.0
Barrel 1 zone temperature	182 to 204	°C
Barrel 2 zone temperature	182 to 204	°C
Barrel 3 zone temperature	188 to 210	°C
Barrel 4 zone temperature	188 to 210	°C
Melt temperature	193 to 216	°C
Nozzle temperature	193 to 216	°C
Traction roller	21.1 to 48.9	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.