XIRAN® SZ15170

About
XIRAN® SZ15170 is an amorphous thermoplastic random SMA (styrene maleic anhydride) copolymer. XIRAN® SZ15170 is typically added to other engineering plastics to increase: thermal stability dimensional stability surface adhesion properties Application areas XIRAN® SZ15170 is specifically designed to be used in film extrusion applications or in combination with an impact modifier like ABS or HIPS as an extrusion or injection molding grade.&&

About

XIRAN® SZ15170 is an amorphous thermoplastic random SMA (styrene maleic anhydride) copolymer. XIRAN® SZ15170 is typically added to other engineering plastics to increase: thermal stability dimensional stability surface adhesion properties Application areas XIRAN® SZ15170 is specifically designed to be used in film extrusion applications or in combination with an impact modifier like ABS or HIPS as an extrusion or injection molding grade.&&

Product Description
Generic	Styrene-maleic anhydride copolymer
Material Status	Commercial: Active
Features	Good Dimensional Stability,Good bond,Copolymer,Heat Stabilized
Availabilitys	Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.12	g/cm³	ISO 1183
Apparent density	0.60	g/cm³	Internal Method
Maleic anhydride content	15	%	Internal Method
water content	< 2000	ppm	ISO 760
molecular weight	170000	g/mol	Internal Method

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	130	℃	ISO 3146
Vicat Softening Temp	125	℃	ISO 306

Supplementary information	Nominal value	Unit	Test method
Particle size	4.00	mm
Polydispersity（Mw/Mn）	2.50		ISO 13885-1
Vinyl diffusion meter	< 2000	ppm	GC

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature	80 to 90	°C
Drying time	2.0 to 3.0	hr
Barrel rear temperature	210 to 240	°C
Barrel middle temperature	210 to 240	°C
Barrel front temperature	210 to 240	°C
Processing (melt) temperature	< 280	°C
Drying temperature	80 to 90	°C
Drying time	2.0 to 3.0	hr
Barrel 1 zone temperature	210 to 240	°C
Barrel 2 zone temperature	210 to 240	°C
Barrel 3 zone temperature	210 to 240	°C
Barrel 4 zone temperature	210 to 240	°C
Barrel 5 zone temperature	210 to 240	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.