SABIC® PP 64M40T

About
SABIC® PP 64M40T is a low fluidity polypropylene impact copolymer with high impact strength and medium stiffness. It contains antistatic agents.

Product Description
Supplier	SABIC
Generic	PP homopolymerization
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	2.0	g/10min	ISO 1133

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
-20 ℃, injection molding	5.0	kJ/m²
23 ℃, injection molding	15	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	70.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	90		ISO 2039-2
Tensile strength (yield)	25.0	MPa	ASTM D638
Bending modulus
1% secant	1100	MPa	ASTM D790-A

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.