| About |
|---|
| PRODUCT SERIES: ST 2000 SERIES SMC PRODUCT DESCRIPTION: HIGH STRENGTH POLYESTER COMPOSITES&& |
| Product Description | |
|---|---|
| Generic | 热固性聚酯 |
| Material Status | Commercial: Active |
| Features | Good Rigidity |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.60 to 1.80 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.0 to 0.20 | % | ASTM D955 |
| Water absorption rate | |||
| 23℃，24hr | 0.10 to 0.30 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 1300 | J/m | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Babbitt hardness | 30 to 60 | ASTM D2583 | |
| Tensile modulus | 12400 | MPa | ASTM D638 |
| tensile strength | 138 | MPa | ASTM D638 |
| Bending modulus | 13800 | MPa | ASTM D790 |
| bending strength | 262 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |