| About |
|---|
| Kraton D1173 B is a clear, linear block copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied from South America in the form below. Kraton D1173 BT – supplied as a porous pellet dusted with talc Kraton D1173 B can be used as a base material for hot melt adhesives. It may also find use as a base material for compound formulations and as a modifier for bitumen.&& |
| Product Description | |
|---|---|
| Generic | SIS |
| Material Status | Commercial: Active |
| Features | Block Copolymer,Inoxidizability,Linear polymer structure |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ISO 2781 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 14 | g/10min | ISO 1133 |
| Solution viscosity | 1200 | mPa·s | Internal Method |
| Polystyrene content | 16 to 19 | % | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Ash Content | |||
| BT | 0.40 to 0.80 | % | ISO 247 |
| Volatiles | < 0.50 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw A, 10 seconds, molded | 29 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 3.00 | MPa | ISO 37 |
| 300% strain | 0.800 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 1200 | % | ISO 37 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Coupling Efficiency | 40 | % | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 25%w toluene solution at 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |