| About |
|---|
| LUVOCOM® 1106-8374是一种聚醚酰亚胺(PEI)材料,含有的填充物为碳纤维增强材料。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,。 LUVOCOM® 1106-8374的主要特性有: 阻燃/额定火焰 传导性 Flame Retardant 高刚度 高强度&& |
| Product Description | |
|---|---|
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Dimensional Stability,Conductive,Flame Characteristics,High Heat Resistance,Lubricating |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.52 | g/cm³ | BS 2782 620A |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength | IEC 60811-1-2 | ||
| 70 ℃, 168 hr, in water | -20 | % | IEC 60811-1-2 |
| 100℃，168 hr | -7.0 | % | IEC 60811-1-2 |
| Changes in tensile stress during fracture | IEC 60811-1-2 | ||
| 70 ℃, 168 hr, in water | -5.0 | % | IEC 60811-1-2 |
| 100℃，168 hr | -20 | % | IEC 60811-1-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| deformation | IEC 60811-3-1 | ||
| 80℃ | 10 | % | IEC 60811-3-1 |
| 90℃ | 15 | % | IEC 60811-3-1 |
| Cold shock | |||
| -30℃ | pass | IEC 60811-1-4 | |
| Low temperature bending | |||
| Temperature index | 260 | ℃ | ISO 4589-3 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 33 | % | ISO 4589-2 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 5 | N/mm | BS 6469 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 96 | ||
| Shaw’s D | 56 | ||
| tensile strength | 12.0 | MPa | IEC 60811-1-1 |
| Tensile strain | |||
| fracture | 150 | % | IEC 60811-1-1 |
| Fracture, -30 ℃ | 60 | % | IEC 60811-1-4 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 120 | °C | |
| Barrel 2 zone temperature | 130 | °C | |
| Barrel 3 zone temperature | 140 | °C | |
| Barrel 4 zone temperature | 150 | °C | |
| Melt temperature | < 170 | °C | |
| Head temperature | 160 | °C | |
| Nozzle temperature | 160 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |