SECCO HD5301AA

About
SECCO HD5301AA is a High Density Polyethylene material. It is available in Asia Pacific. Primary attribute of SECCO HD5301AA: RoHS Compliant. Typical application of SECCO HD5301AA: Food Contact Applications&&

Product Description
Supplier	SECCO
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ISO 1183
Melt Flow Rate
190℃，21.6kg	9.5	g/10min	ISO 1133

film	Nominal value	Unit	Test method
tensile strength			ISO 527-3
MD, yield	32.0	MPa	ISO 527-3
TD, yield	29.0	MPa	ISO 527-3
MD, fracture	65.0	MPa	ISO 527-3
TD, fracture	56.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture	400	%	ISO 527-3
TD, fracture	450	%	ISO 527-3
Drop hammer impact	150	g	ISO 7765-1

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.