China PPS Filament

About
It is one of our PPS Fiber product series. It owns outstanding performances of chemical resistance, thermo stability in high temperature condition, flame retardant, non-conducting, radiation resistance, etc. Therefore, it is called special functional fiber. Besides this, it is easy to card and has low thermal shrinkage rate. It is mainly used to make special functional fabric and thread. Generally it can be single or blended weaved according to different requirement to make different fabric. It can be used to make fireproof or insulating fabric, carpets which are used in special area, hanging, anti-fog material and radiation resistant material, framework of pipe, insulator, gasket and packing material, etc. Chemical Stability: Except hot concentrated sulfuric acid and nitric acid, it owns strong performance of acid and alkaline resistance. No solvent could dissolve it under 200°C&&

About

It is one of our PPS Fiber product series. It owns outstanding performances of chemical resistance, thermo stability in high temperature condition, flame retardant, non-conducting, radiation resistance, etc. Therefore, it is called special functional fiber. Besides this, it is easy to card and has low thermal shrinkage rate. It is mainly used to make special functional fabric and thread. Generally it can be single or blended weaved according to different requirement to make different fabric. It can be used to make fireproof or insulating fabric, carpets which are used in special area, hanging, anti-fog material and radiation resistant material, framework of pipe, insulator, gasket and packing material, etc. Chemical Stability: Except hot concentrated sulfuric acid and nitric acid, it owns strong performance of acid and alkaline resistance. No solvent could dissolve it under 200°C&&

Product Description
Supplier	Deyang
Generic	PPS
Material Status	Commercial: Active
Features	Gamma radiation,Flame Characteristics,High Heat Resistance,Solvent resistance,Heat Stabilized,Insulation
Availabilitys	Asia Pacific

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile strain
fracture	22	%	Internal Method

THERMAL	Nominal value	Unit	Test method
Continuous use temperature	190	℃

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	40	%	Internal Method

Supplementary information	Nominal value	Unit	Test method
Breaking Strength	4.10	CN/dt
Linear Density	220-440dtex/50-100f

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.