| About |
|---|
| Luxus PP 16250是一种聚丙烯材料,含有的填充物为20% 矿物填料。 该产品在欧洲有供货,。 Luxus PP 16250的主要特性为:环保/绿色。&& |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 17 to 22 | g/10min | ISO 1133 |
| Shrinkage rate | 0.70 to 1.4 | % | |
| Ash Content | |||
| 650℃ | 15000 | mm | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| fracture | 8.0 | % | ISO 527-2 |
| Bending modulus | 900 to 1500 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ISO 180 | ||
| — | 18 to 27 | kJ/m² | |
| -40℃ | 2.0 | kJ/m² | |
| Multi axial instrumented peak impact force | 600 to 700 | N | ISO 527 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 70.0 | ℃ | ISO 75-2/B |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| drying time | 2.0 | hr | |
| drying temperature | 80 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |